Conversion of natural gas jet flame burners to hydrogen

In a study of conversion from CH₄ to H₂, jet flame characteristics of these gases and their blends are compared on a burner diameter scale of mm. Low velocity H₂ and CH₄ jets, burned on pipes of different diameters, indicate higher blow-off limits for H₂, but lower heat release rates, a consequence of its lower specific energy. Compensation for this might be obtained through increased H₂ flow velocity, or a small increase in pipe diameter. Blended CH₄/H₂ flames have lower heat release rates than CH₄ alone, yet small proportions of H_2, with CH₄ might still be burned, on a CH₄ burner. Throughout, fundamental understanding is enhanced through two dimensionless groups: laminar flame thickness normalised by burner diameter, δ_k/D, and the dimensionless flow number, U1. These suggest an optimal role for H₂ combustion, utilizing its high acoustic and blow-off velocities, in high intensity, subsonic, combustors, at low δ_k/D, and high U1.     

Influence of laser ignition on characteristics of an engine for hydrogen enriched CNG and iso-octane usage

The study has focused on determining the laser plug effects on engine characteristics and the laser plug usage results have compared with spark plug usage. The laser ignition technique is a type of new ignition technique and an important solution that can make combustion systems more efficient. The testing of an engine with a laser plug is the novelty of the study and the tests were carried out with reference to equivalence ratio and plug power ranges. The behaviors of the engine at full load were examined so experimentally for both ignition techniques at hydrogen enriched CNG and iso-octane mixture usage. The tests were carried out for variations of 0.4–2.0 equivalence ratio and 20–120 W plug power. A mixture that 90% iso-octane and 10% HCNG in mass was used at two ignition modes in tests for 3300 rpm maximum engine torque speed. Also, the flame formation and propagation for both ignition techniques were detected via a high-speed camera. The tests have shown the laser ignition leads to more energy consumption in the rich mixture conditions and also, less energy is required in the lean conditions. The laser ignition discharge has extended the engine's lean combustion limits via a small energy input at the tests. The high-speed camera images have shown that the laser ignition reduces the Kernel flame formation and propagation time. The laser ignition technique was produced less NO_x than the conventional spark ignition method.     

A fuel-cell/battery hybrid DC backup power system via a new high step-up three port converter

In this paper, a fuel-cell (FC)/battery hybrid direct-current (DC) backup power system is proposed for high step-up applications. This system is composed of a newly developed non-isolated three-port converter, which achieves a high voltage gain by taking the advantage of a quasi Z-source network and an energy transfer capacitor. After analyzing the converter, a comprehensive comparison study and a design procedure are provided. Moreover, the controllers regulating the source power levels while smoothing the FC power profile according to the proposed energy management strategy (EMS) are designed based on the developed small-signal model of the proposed converter. Both hardware and controller design procedures are validated through the PSIM model of the whole system. As a result, it is shown that the proposed system can effectively couple FC and battery while transferring their energies to a high voltage DC bus according to the offered EMS.     

An unsupervised approach for fault diagnosis of power transformers

Electrical utilities apply condition monitoring on power transformers (PTs) to prevent unplanned outages and detect incipient faults. This monitoring is often done using dissolved gas analysis (DGA) coupled with engineering methods to interpret the data, however the obtained results lack accuracy and reproducibility. In order to improve accuracy, various advanced analytical methods have been proposed in the literature. Nonetheless, these methods are often hard to interpret by the decision-maker and require a substantial amount of failure records to be trained. In the context of the PTs, failure data quality is recurrently questionable, and failure records are scarce when compared to nonfailure records. This work tackles these challenges by proposing a novel unsupervised methodology for diagnosing PT condition. Differently from the supervised approaches in the literature, our method does not require the labeling of DGA records and incorporates a visual representation of the results in a 2D scatter plot to assist in interpretation. A modified clustering technique is used to classify the condition of different PTs using historical DGA data. Finally, well-known engineering methods are applied to interpret each of the obtained clusters. The approach was validated using data from two different real-world data sets provided by a generation company and a distribution system operator. The results highlight the advantages of the proposed approach and outperformed engineering methods (from IEC and IEEE standards) and companies legacy method. The approach was also validated on the public IEC TC10 database, showing the capability to achieve comparable accuracy with supervised learning methods from the literature. As a result of the methodology performance, both companies are currently using it in their daily DGA diagnosis.     

汽轮机运行调节方式优化策略探析

分析了汽轮机的喷嘴调节、节流调节、旁通调节、定压调节和滑压调节等几种基本调节方式的特点,指出现役燃煤火电机组多因调节方式单一而普遍存在着调峰能力不足、负荷响应迟缓以及因长期偏离设计工况致使运行安全经济性下降等诸多问题,提出了通过调节方式的优化组合,采用(节流)定压-滑压-(喷嘴)定压-旁通调节的复合调节方式,以实现煤电机组安全、经济、灵活、快速地参与电网的深度调峰,破解具有强随机波动性的新能源电量规模化并网的困境。     

新型地锚张弦梁式泥石流格栅坝构件受力的简化计算方法

针对常见泥石流防治结构被冲击破坏的问题，基于“柔性消能”理念，结合张弦梁结构和竖向预应力锚杆技术，提出一种既能改善结构受力性能、增加结构整体抗冲击能力、保证结构安全可靠，又能减小结构构件截面尺寸、节约成本、便于现场施工组装和后期运营维护的新型地锚张弦梁式泥石流格栅坝，并阐述其技术原理。根据泥石流荷载分布和新型地锚张弦梁式泥石流格栅坝的受力特征，给出其简化的内力计算方法；并利用SAP2000建立新结构有限元模型，分析了结构的整体受力，验证了构件简化计算方法的合理性；结合Python语言和Qt De? signer软件开发了相应的设计计算软件，对新型地锚张弦梁式泥石流格栅坝的内力进行求解。结果表明：提出的新结构抗冲击性能好，构件受力均匀；以后设计中应关注竖杆的剪切脆性破坏和立柱偏心受力情况，保证结构安全；变形协调仅使底层张弦梁与竖杆内力偏大，实际工程应用时，应着重验算底层构件，防止其破坏；文中提出的简化计算方法能较准确的反映结构的受力特性，具有一定的合理性，研究可为新型地锚张弦梁式泥石流格栅坝的设计计算和推广应用提供理论依据和技术支持。     

Lightweight reactor design by additive manufacturing for preheating applications using metal hydrides

Thermal energy storage systems based on metal hydrides can be a solution for preheating fuel cells (FCs). They can provide thermal energy at temperatures below −20 °C during startup, while heat at 50 °C during operation is sufficient for regeneration. The challenge of such a system in mobile applications is the final weight specific thermal power. In this study, a reactor design based on additive manufacturing techniques for ~300 g of metal hydride is presented. Here, a reactor (passive) to hydride (active) mass ratio of 0.97 is realized, still reaching high weight specific thermal power of up to 2.1 kW/kg_MH at −20 °C and 8 bar (LmNi_4.91Sn_0.15). Considering the example of preheating a FC from −20 °C in ~120 s, the performance of LaNi₅ and LmNi_4.91Sn_0.15 is studied. While LaNi₅ requires higher regeneration temperatures than LmNi_4.91Sn_0.15 (>40 °C compared to >20 °C), its performance is less sensitive to operative variations due to its nearly ideal thermodynamic characteristic.     

Using deep learning to combine static and dynamic power analyses of cryptographic circuits

Side-channel attacks have shown to be efficient tools in breaking cryptographic hardware. Many conventional algorithms have been proposed to perform side-channel attacks exploiting the dynamic power leakage. In recent years, with the development of processing technology, static power has emerged as a new potential source for side-channel leakage. Both types of power leakage have their advantages and disadvantages. In this work, we propose to use the deep neural network technique to combine the benefits of both static and dynamic power. This approach replaces the classifier in template attacks with our proposed long short-term memory network schemes. Hence, instead of deriving a specific probability density model for one particular type of power leakage, we gain the ability of combining different leakage sources using a structural algorithm. In this paper, we propose three schemes to combine the static and dynamic power leakage. The performance of these schemes is compared using simulated test circuits designed with a 45-nm library.     

1 GWt PB-FHR负荷跟踪运行特性分析

为研究熔盐堆系统在商业应用中的价值，分析其是否满足电网负荷的变化需求和安全运行的能力，本文以1 GWt球床式氟盐冷却高温堆（PB-FHR）为研究对象，仿真计算其在负荷跟踪模式下的瞬态行为和运行特性。以RELAP5/MOD4.0程序为研究工具，并植入相关的熔盐物性与计算关系式，建立氟盐冷却高温堆的热工水力系统与功率控制系统的仿真模型，对典型负荷工况参数变化情况下控制系统的响应特性进行仿真分析。结果表明：该氟盐冷却高温堆系统在设计的控制逻辑的调控下，展示出良好的负荷跟踪运行能力，堆芯功率能迅速响应负荷变化，功率超调和温度超调小，反应堆的运行参数始终处于合理的运行范围内。